Warning: file_put_contents(/www/wwwroot/www.1000114.com/index/temp_block/www.kj3234.com/cfzvyeyycchtml.php): failed to open stream: No space left on device in /www/wwwroot/www.1000114.com/index.php on line 153
18岁未成年禁看网站18岁未成年禁看网站,12岁男生如何自我安慰12岁男生如何自我安慰

18岁未成年禁看网站18岁未成年禁看网站,12岁男生如何自我安慰12岁男生如何自我安慰

发布日期:2021年10月16日
Configure for Abrasion & Torque

The Third Rule is that the hose configuration should always be designed, and supported where necessary, to avoid any possibility of external abrasion.

In some cases, the length, configuration and angle of the hose can be designed to avoid abrasion. In others, static or moving support frames or support wheels are required.

The Fourth Rule is that the hose must not be subjected to torque, either during connection, or as a result of the flexing cycle.

Torque (twist) in the hose can be applied during connection if the hose is accidentally twisted, or if the second end being connected is a screwed connection, and the hose is subjected to torque during final tightening.

In a flexing application, if any flexing cycle of the hose occurs in 3 dimensions instead of 2, then torque will also occur: